COOLER MASTER MASTERLIQUID ML360R RGB All In One 360mm Cpu Liqud Cooler MLX-D36M-A20PC-R1
Overview :
THE MOST COLORFUL WAY TO COOL MASTERLIQUID ML360R RGB
DUAL CHAMBER LOW-PROFILE DUAL CHAMBER
The PPS (Polyphenylene sulfide) and glass fiber construction resists a broad range of chemicals and is unaffected by moisture or immersion in water. Our pump is light and impervious to oxidation and corrosion.
STYLISH RADIATOR
Custom design low resistance radiator allows higher flow rate, heat exchange efficiency and provides unmatched cooling performance
DOUBLE TUBING
FEP tubing makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.
AIR BALANCE FANS
Aside from having perfect balance of airlfow and airpressure to exhaust air through the fins and out of the case, the dual fans uses an silent driver IC that smoothens fan operation to reduce fan clicks and vibrations.
Specification :
| Product Name | MasterLiquid ML360R RGB |
| Model | MLX-D36M-A20PC-R1 |
| CPU Socket | Intel© LGA 2066/ 2011-v3 / 2011 / 1151 / 1150 / 1155 / 1156 / 1366 / 775 AMD Socket AM4 / AM3 / AM3 / AM2 / AM2 / FM2 / FM2 / FM1 |
| Radiator Material | Aluminum |
| Radiator Dimensions | 394 x 119 x 27.2mm (15.5 x 4.7 x 1.1″) |
| Fan Dimensions | 120 x 120 x 25 mm (4.7 x 4.7 x 1″) |
| Fan Quantity | 3 PCS |
| Fan Speed | 650 ~ 2000 RPM (PWM) ± 10% |
| Fan Air Flow | 66.7 CFM (Max) |
| Fan Air Pressure | 2.34 mmH2O (Max) |
| Fan MTTF | 160,000 hours |
| Fan Noise Level | 6 ~ 30 dBA |
| Fan Connector | 4-Pin (PWM) |
| Fan Rated Voltage | 12 VDC |
| Pump Dimensions | 83.6 x 71.8 x 52.7 mm (3.3 x 2.8 x 2.1″) |
| Pump MTTF | 70,000 hours |
| Pump Noise Level | < 15 dBA |
| Pump Connector | 3-Pin |
| Pump Rated Voltage | 12 VDC |
| Warranty | 2 Years |
| EAN Code | 4719512071007 |
| UPC Code | 884102043505 |
balrajsinghvirk –
👍🏻 PROS:
++++++++
+ Build Quality is very good.
+ Overall the whole unit feels premium.
+ Pump doesn’t give any weird whining sound at all.
+ Pump finishing is Glossy type which makes it feels and look more premium.
+ The translucent outer ring front face has a Textured design inside which gives the look like an arc reactor of IRON MAN which looks super lit.
+ ARGB of the Pump is very good and bright enough.
+ Pump Face is detachable so no worries about aligning the pump in the wrong orientation.
+ Installation is super easy.
+ AIO Tubing is braided and feels very high quality.
+ Radiator is very good in terms of finishing.
+ Fan are also good giving decent airflow but I am using Noctua NF12 3000 rpm fan for Legendary performance.
+ AIO TDP is 220 Approx after tons of overclocking testing.
+ Cables of the AIO and Fans are braided.
+ Seals are pretty tight and no leakage at all.
+ ARGB Controller is also included which is like the cherry on the cake.
+ My temps have gone down to at least 10-15 degrees as compared to 130TDP Air Cooler.
👎🏻 CONS:
————–
– The screw area on the pump where the socket brackets are installed is made of plastic which can be brake if applied too much pressure while tightening the screw so be 1000% careful while installing. (Company should have made it with Aluminum as it’s the important part of the installation).
– The Metal brackets are a bit scratched and are not pure finished (Its a long Problem from the cooler master end in every AIO or Air cooler products)
🙇🏻♂️ FINAL THOUGHTS:
===================
Go for it it’s the best AIO in this Price range trust me. Deep cool, Lian li all are not close to this AIO performance. If you don’t have NZXT 360MM AIO Budget go for this one. Finally Thankyou PrimeABGB for your wonderful and fast-selling services u r the best among all.
😎 PRO TIP:
$$$$$$$$$$$
Be careful while installing the radiator as there are Mini fins in the radiator that can easy bend just by holding it from them. And Always dry run the AIO for 15-30 mins to assure there is no leakage before the final installation.