Lexar NQ100 1TB SATA III 2.5 inch SSD 7mm LNQ100X001T-RNNNG
Overview :
Lexar NQ100 1TB SATA III 2.5-inch SSD is built for upgrading compatible systems requiring SATA-based solid-state storage.
Using the SATA III (6Gb/s) interface, it supports systems with standard SATA ports. Performance is limited to SATA bandwidth and differs from NVMe PCIe SSDs.
Its 2.5-inch form factor and 7mm height allow installation in most modern laptops and desktop drive bays.
The manufacturer does not specify NAND type, controller, or cache configuration. The SSD includes shock and vibration resistance due to the absence of moving mechanical parts.
Lexar NQ100 1TB installation requires available SATA power and data connectors and is intended for improving storage responsiveness compared to mechanical drives.
Best suited for
• Desktop and laptop SATA upgrades
• Storage expansion with SATA interface
• Replacing older hard drives
• Everyday productivity systems
Not suitable for
• NVMe-only M.2 slots
• PCIe Gen storage environments
• Systems requiring ultra-high bandwidth storage
Specification :
| Model | LNQ100X001T-RNNNG |
| Capacity | 1TB |
| Interface | 2.5” SATA III (6Gb/s) |
| Performance | Sequential read up to 550MB/s |
| Form Factor | 2.5”, 7mm thickness |
| Shock Resistance | 1500G, 0.5ms, Half Sine Wave |
| Vibration Resistance | 7–800Hz, 3.08Grm, 20G |
| TBW (Total Bytes Written) | 336TB |
| DWPD (Drive Writes Per Day) | 0.32 |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Dimensions (L × W × H) | 10.02 × 6.99 × 0.7 cm |
| Weight | 0.034 kg |
| Warranty | 3-Year Limited Warranty |
