Sabrent 1TB Rocket Q4 NVMe PCIe Gen4 x 4 M.2 2280 Internal SSD with Heatsink SB-RKTQ4-HTSS-1TB

Sabrent 1TB Rocket Q4 NVMe PCIe Gen4 x 4 M.2 2280 Internal SSD with Heatsink SB-RKTQ4-HTSS-1TB

Overview : 

The Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD With Heatsink delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

The Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 3700 MB/s (read) and 1800 MB/s (write), significantly faster than PCIe 3.0.

Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3300MB/s.

The Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3300 MB/s (read) and 3300 MB/s (write).

When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance. This Sabrent Sabrent 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD comes with the Sabrent M.2 2280 SSD Rocket Heatsink preinstalled.

Features:

• NVMe M.2 PCIe Gen4 x4 Interface.
• PCIe 4.0 Compliant / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands.
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
• Preinstalled Rocket NVMe Heatsink.
• Upgradeable Firmware.

Package contents:

• 1TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 SSD with Heatsink.
• User Manual.

Specification :