Supermicro SuperServer 4U Rackmount Barebone Server 4028GR-TRT
Overview :
- Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v3 family; QPI up to 9.6GT/s
- Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
- Expansion slots: 8 PCI-E 3.0 x16 (double-width) slots 2 PCI-E 3.0 x8 (in x16) slots 1 PCI-E 2.0 x4 (in x16) slot
- Dual 10GBase-T LAN with Intel X540
- 24x 2.5″ Hot-swap drive bays
- 8x 92mm RPM Hot-Swap cooling fans
- 1600W Redundant (2 2) Power Supplies; Platinum Level (94% )
Specification :
Product SKUs | |
SYS-4028GR-TRT | SuperServer 4028GR-TRT (Black) |
Motherboard | Super X10DRG-OT -CPU |
Processor/Cache | |
CPU | Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) * |
Dual Socket R3 (LGA 2011) | |
Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
System Bus | QPI up to 9.6 GT/s |
Note | † BIOS version 2.0 or above is required |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
GPU/Xeon Phi Support | NVIDIA® Tesla® K10/K40/K80/M40/M60/Xeon Phi |
System Memory | |
Memory Capacity | 24x 288-pin DDR4 DIMM slots |
Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM | |
Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
LRDIMM: 64GB, 32GB | |
3DS LRDIMM: 128GB | |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices | |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
ASPEED AST2400 BMC | |
Network Controllers | Dual Port 10GbE |
Virtual Machine Device Queues reduce I/O overhead | |
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
Graphics | ASPEED AST2400 BMC |
Input / Output | |
SATA | 10 SATA3 (6Gbps) ports |
LAN | 2 RJ45 10GBase-T LAN ports |
1 RJ45 Dedicated IPMI LAN port | |
USB | 4 USB 3.0 ports |
Video | 1 VGA Connector |
Serial Port | 1 Serial header |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) |
APM 1.2 | |
DMI 2.3 | |
PCI 2.3 | |
ACPI 1.0 / 2.0 / 3.0 | |
USB Keyboard support | |
SMBIOS 2.7.1 | |
UEFI | |
Chassis | |
Form Factor | 4U Rackmountable |
Rackmount Kit (MCP-290-00057-0N) | |
Model | CSE-418GTS-R3200B |
Dimensions | |
Height | 7.0″ (178mm) |
Width | 17.2″ (437mm) |
Depth | 29″ (737mm) |
Weight | Net Weight: 65.5 lbs (29.7 kg) |
Gross Weight: 100 lbs (45.3 kg) | |
Available Colors | Black |
Drive Bays | |
Hot-swap | 24 Hot-swap 2.5″ hard drive bays |
Expansion Slots | |
PCI-Express | 8 PCI-E 3.0 x16 (double-width) slots |
2 PCI-E 3.0 x8 (in x16) slots | |
1 PCI-E 2.0 x4 (in x16) slot | |
Backplane | SAS/SATA HDD Backplane |
System Cooling | |
Fans | 8 Hot-swap 92mm cooling fans |
Shrouds | 1 Air Shroud (MCP-310-41808-0B) |
Power Supply | |
1600W 1U Redundant Power Supplies with PMBus | |
Total Output Power | 1000W: 100 – 127Vac |
1600W: 200 – 240Vac | |
Dimension | 73.5 x 40 x 265 mm |
(W x H x L) | |
Input | 100-127Vac / 12.9A Max / 50-60Hz |
200-240Vac / 9.5A Max / 50-60Hz | |
12V | Max: 82A / Min: 0.1A (100-127Vac) |
Max: 132A / Min: 0.1A (200-240Vac) | |
12V SB | Max: 2A / Min: 0.2A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | Platinum Level |
PC Health Monitoring | |
CPU | Monitors for CPU Cores, 1.2V, 1.5V, 3.3V, 12V, ( 3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. |
4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V | |
FAN | 4-pin fan headers with tachometer status monitoring |
Low noise fan speed control mode | |
Temperature | Monitoring for CPU and system environment |
Thermal Control for 8 fan connectors | |
Other Features | Chassis intrusion detection |
Operating Environment / Compliance | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: |
10°C to 35°C (50°F to 95°F) | |
Non-operating Temperature: | |
-40°C to 70°C (-40°F to 158°F) | |
Operating Relative Humidity: | |
8% to 90% (non-condensing) | |
Non-operating Relative Humidity: | |
5% to 95% (non-condensing) |